|Universal Speaker Protector Mk3 PCB [01110151 RevB]|
PCB for the revised Universal Loudspeaker Protector module.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
88 x 80mm.
Please note: the SMD bridge rectifier pads on the RevB PCB are not wired correctly. The negative terminal goes to GND instead of LK1. If you are fitting the MBS04 SMD bridge rectifier and leaving LK1 out, cut the track connecting to the bridge rectifier's negative pin. As a result, these boards have been discounted. The fixed version (RevC) is available separately.