Silicon ChipOuter Back Cover - August 2009 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: Tasers can be lethal
  4. Subscriptions
  5. Feature: What Ship Is That? by Stan Swan
  6. Project: Converting a Uniden Scanner To Pick Up AIS Signals by Stan Swan
  7. Feature: Digital Radio Is Coming, Pt.5 by Alan Hughes
  8. Project: An SD Card Music & Speech Recorder/Player by Mauro Grassi
  9. Review: JTAGMaster Boundary Scan Tester by Mauro Grassi
  10. Project: Lead-Acid/SLA Battery Condition Checker by Jim Rowe
  11. Project: A 3-Channel UHF Rolling-Code Remote Control, Pt.1 by John Clarke
  12. Vintage Radio: The unnamed console; an orphan from the 1930s by Rodney Champness
  13. Book Store
  14. Advertising Index
  15. Outer Back Cover

This is only a preview of the August 2009 issue of Silicon Chip.

You can view 33 of the 104 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Articles in this series:
  • Digital Radio Is Coming, Pt.1 (February 2009)
  • Digital Radio Is Coming, Pt.2 (March 2009)
  • Digital Radio Is Coming, Pt.3 (April 2009)
  • Digital Radio Is Coming, Pt.4 (June 2009)
  • Digital Radio Is Coming, Pt.5 (August 2009)
Items relevant to "An SD Card Music & Speech Recorder/Player":
  • dsPIC33FJ64GP802-I/SP programmed for the SD Card Music & Speech Recorder/Player [0110809A.HEX] (Programmed Microcontroller, AUD $25.00)
  • dsPIC33FJ64GP802-I/SP programmed for the SD Card Music & Speech Recorder/Player [0110809J.HEX] (Programmed Microcontroller, AUD $25.00)
  • dsPIC33 firmware and source code for the SD Card Music & Speed Recorder/Player [0110809A.HEX] (Software, Free)
  • SD Card Music & Speech Recorder/Player PCB pattern (PDF download) [01108092] (Free)
Items relevant to "Lead-Acid/SLA Battery Condition Checker":
  • Improved Lead-Acid Battery Condition Checker PCB [04108091] (AUD $15.00)
  • Lead-Acid Battery Condition Checker PCB pattern (PDF download) [04108091] (Free)
  • Lead-Acid Battery Condition Checker front panel artwork (PDF download) (Free)
Items relevant to "A 3-Channel UHF Rolling-Code Remote Control, Pt.1":
  • PIC16F88-I/P programmed for the 3-Channel Rolling Code UHF Remote Control Transmitter [1500809A.HEX] (Programmed Microcontroller, AUD $15.00)
  • PIC16F88-I/P programmed for the 3-Channel Rolling Code UHF Remote Control Receiver [1500809B.HEX] (Programmed Microcontroller, AUD $15.00)
  • PIC16F88 firmware and source code for the 3-Channel UHF Rolling Code Remote Control [1500809A/B.HEX] (Software, Free)
  • 3-Channel UHF Rolling Code Remote Control Transmitter PCB pattern (PDF download) [15008091] (Free)
  • 3-Channel UHF Rolling Code Remote Control Receiver PCB pattern (PDF download) [15008092] (Free)
  • 3-Channel UHF Rolling Code Remote Control Receiver front panel artwork (PDF download) (Free)
  • 3-Channel UHF Rolling Code Remote Control Transmitter front panel artwork (PDF download) (Free)
Articles in this series:
  • A 3-Channel UHF Rolling-Code Remote Control, Pt.1 (August 2009)
  • 3-Channel UHF Rolling-Code Remote Control, Pt.2 (September 2009)

Purchase a printed copy of this issue for $10.00.

100% Australian Owned Est. 1930 “Setting the standard for quality & value” REWARD YOURSELF! UPDATE YOUR WORKSHOP • • • • • • • • 924 $ 350W, 240V Motor • 385mm x 93mm Table Electronic Variable speed • 2 speed gearbox Head tilts ±45º both directions Ground work table with T-slots Spring return assisting milling head Vertical micro feed dial .025mm Metric dial graduations 0.02mm 2-speed gearbox (high / low) drive system to maximise torque (M150) TILTING INDEXING HEAD FITTING & MACHINING BOOK • Reversible jaws • 94:1 Ratio 69 $ 110mm 395 $ (L341) (R003) DEBURRING TOOL 9 Blades - Style ‘E’ Spring Return System • Style "E" with universal extendible handle • Includes 9 Blades Sliding Lock 14 $ (D110) Electronic Variable Speed System Milling Head Tilts ±45º AL-30 BENCH LATHE • • • • • • • HAND SHEARS 250W 240V Motor • 180mm x 300mm • Cast Iron ribbed bed 300mm BC • 90mm CH • High/low speed gear lever Electric variable speed from 0-2500rpm Forward/reverse spindle direction switch Precision ‘V’-beds are hardened and ground Includes a set of change gears for metric thread cutting $ Includes 8mm, 5 piece Turning Tool Set (L194) 869 132 $ 55 $ 110 (L195) Face Plate - ø160mm (L196) 1 x Fixed Steady, 1 x Travelling Steady L196 L195 BENCH VICES 119.90 (S186) 220 $ Vertical cutting table 100 x 150mm capacity 3-Speed 1/2HP motor Cast iron construction Portable - on wheels for site work Fully-adjustable blade roller for accurate and straight cutting • Sealed worm and pinion gearbox drive Sydney (02) 9890 9111 374 $ 20T HYDRAULIC PRESS • Spring return ram • Complete with bending plates 20 TONNE 275 $ (B002) • Ideal for cleaning all types of parts • 240V input • Steel cabinet • Includes: Worklight, Ceramic nozzels, Gun, Gloves 590x500x300-360mm 88 (A370) Brisbane (07) 3274 4222 198 $ 6” 150mm (S288) Melbourne (03) 9212 4422 59 94 $ 129 $ $ (V088) (V089) (V090) SERVICE CARTS • Security Lock • Powder coated finish 2 Draw Pull Apart Lid 297 $ (T754) (P144) SANDBLAST CABINET $ 5” 125mm (B043) AUTO PARTS WASHERS 22 Litre 4” 100mm 275 $ (L197) • • • • • • 352 $ BB12 BAR BENDER (T055) BS-4A BANDSAW PEDESTAL MODEL (D140) 4mm Shear, $ 150mm Blade • Includes 8 formers • 3/4" - 1" Square cap. • 3/8" - 7/8" Round cap L197 (D138) COLD BENDING FLAT: 100 x 5mm SQUARE: 16 x 16mm ROUND: 18mm dia. ANGLE: 60 x 8mm TUBE BENDER 4 Jaw Chuck - ø80mm $ 319 $ INCLUDES: 5 sets of rolls, wiring, crimping, edge beading, single bead & elbow edging 198.00 (S188) Optional Accessories • 1HP 240Volt • 16-speed • 16mm drill capacity • 170mm throat depth • Medium duty • Slotted work table • Aluminium Fan-cooled • Table tilts left & right to 45º & rotates 360º (S640) • Heavy duty cast iron • 0.7mm MS. capacity • 175mm throat • Stroke on ram 20mm • 50mm shaft to centre 6.5mm Shear, $ 300mm Blade Tool Set Included 396 $ SJ-22 SWAGE & JENNY BENCH DRILL 4PCE CASTER WHEELS • • • • 2 x Fixed & 2 x Swivel with Brake 35mm wide wheel Wheel capacity 70kg each Mounting plate 102 x 80mm with 4 holes 65 $ (C410) Perth (08) 9373 9999 www.machineryhouse.com.au 106  Silicon Chip siliconchip.com.au Specifications & Prices are subject to change without notification. All prices include G.S.T. and valid until 290909 5_SC_290709 HM-10 MINI MILL DRILL