Silicon ChipOuter Back Cover - June 2009 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: Let's have no more of this carbon pollution nonsense
  4. Feature: Mal’s Electric Vehicle Conversion by Leo Simpson
  5. Project: High-Current, High-Voltage Battery Capacity Meter, Pt.1 by Mauro Grassi
  6. Project: GPS Driver Module For The 6-Digit Clock, Pt.2 by Jim Rowe
  7. Feature: Digital Radio Is Coming, Pt.4 by Alan Hughes
  8. Project: Build A Beam-Break Flash Trigger by Jim Rowe
  9. Project: Hand-Held Digital Audio Oscillator by Darian Lovett & Mauro Grassi
  10. Project: PICAXE Humidity Measuring Using The HopeRF HH10D by Wayne Geary & Stan Swan
  11. Salvage It: Gather up those discarded monitors before it’s too late by Leo Simpson
  12. Feature: VoiceMe: A Voice-Activated Remote Control by Rick Walters
  13. Vintage Radio: The AWA 693P 3-Band 8-Transistor Portable by Rodney Champness
  14. Feature: Tech Support: The View From The Other Side by Barrie Smith
  15. Back Issues
  16. Book Store
  17. Advertising Index
  18. Outer Back Cover

This is only a preview of the June 2009 issue of Silicon Chip.

You can view 31 of the 104 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Items relevant to "High-Current, High-Voltage Battery Capacity Meter, Pt.1":
  • PIC18F2550-I/SP programmed for the Battery Capacity Meter [0420609A.HEX] (Programmed Microcontroller, AUD $20.00)
  • PIC18F2550 firmware and source code for the High-Current, High-Voltage Battery Capacity Meter (Software, Free)
  • High-Current, High-Voltage Battery Capacity Meter PCB pattern (PDF download) [04206091] (Free)
  • High-Current, High-Voltage Battery Capacity Meter front panel artwork (PDF download) to suit Altronics LCD (Free)
  • High-Current, High-Voltage Battery Capacity Meter front panel artwork (PDF download) to suit Jaycar LCD (Free)
Articles in this series:
  • High-Current, High-Voltage Battery Capacity Meter, Pt.1 (June 2009)
  • High-Current, High-Voltage Battery Capacity Meter, Pt.2 (July 2009)
Items relevant to "GPS Driver Module For The 6-Digit Clock, Pt.2":
  • 6-Digit GPS Clock Autodim Add-On PCB [04208091] (AUD $5.00)
  • 6-Digit GPS Clock Driver PCB [07106091] (AUD $15.00)
  • 6-Digit GPS Clock Main PCB [04105091] (AUD $25.00)
  • PIC16F877A-I/P programmed for the 6-Digit GPS Clock [0410509E.HEX] (Programmed Microcontroller, AUD $20.00)
  • VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable (Component, AUD $25.00)
  • PIC16F877A firmware and source code for the 6-digit GPS Clock [0410509E.HEX] (Software, Free)
  • 6-Digit GPS Clock Autodim Add-On PCB pattern (PDF download) [04208091] (Free)
  • 6-Digit Clock GPS Driver PCB pattern (PDF download) [07106091] (Free)
  • 6-Digit GPS Clock main PCB pattern (PDF download) [04105091] (Free)
Articles in this series:
  • Dead-Accurate 6-Digit GPS-Locked Clock, Pt.1 (May 2009)
  • GPS Driver Module For The 6-Digit Clock, Pt.2 (June 2009)
Articles in this series:
  • Digital Radio Is Coming, Pt.1 (February 2009)
  • Digital Radio Is Coming, Pt.2 (March 2009)
  • Digital Radio Is Coming, Pt.3 (April 2009)
  • Digital Radio Is Coming, Pt.4 (June 2009)
  • Digital Radio Is Coming, Pt.5 (August 2009)
Items relevant to "Build A Beam-Break Flash Trigger":
  • Beam-Break Flash Trigger PCBs [13106091-2] (AUD $12.50)
  • Beam-Break Flash Trigger PCB patterns (PDF download) [13106091/2] (Free)
  • Beam-Break Flash Trigger front panel artwork (PDF download) (Free)
Items relevant to "PICAXE Humidity Measuring Using The HopeRF HH10D":
  • PICAXE-08M BASIC source code for the PICAXE Humidity Sensor (Software, Free)
Articles in this series:
  • Tech Support: Terror Tales From The Front Line (May 2009)
  • Tech Support: The View From The Other Side (June 2009)

Purchase a printed copy of this issue for $10.00.
100% Australian Owned Est. 1930 “Setting the standard for quality & value” YOUR ANSWER TO ALL THOSE BORING BITS DRILL CHUCKS SLEEVES Hardened & ground Note: NT40, NT30 & R8 Morse Taper Adapters also available Metric 163.90 H.S.S. FULLY GROUND CENTRE DRILLS 1/2" REDUCED SHANK SET $ (T014) KEYED 53.90 (C289) 16mm Keyed JT3 75.90 (C290) $ 13mm Keyless JT6 119.90 (C292) $ 16mm Keyless JT3 141.90 (C294) 163.90 $ (T015) HSS HAND TAPS & SETS CODE (T800) (T801) (T802) (T803) (T804) (T805) (T806) (T808) (T810) WHITWORTH - Set UNC - Set SIZE 1/4” x 20 5/16” x 18 3/8” x 16 1/2” x 13 5/8” x 11 3/4” x 10 PRICE $13.20 $13.20 $13.20 $15.40 $22.00 $24.20 $31.90 $41.80 $68.20 CODE (T820) (T821) (T822) (T823) (T824) (T825) (T826) (T827) PRICE $13.20 $13.20 $15.40 $19.80 $22.00 $41.80 $46.20 $68.20 CODE (T834) (T835) (T836) (T837) (T838) (T839) PRICE $14.30 $19.80 $22.00 $41.80 $46.20 $68.20 CODE (T850) (T851) (T852) 2MT x JT6 2MT x JT3 3MT x JT6 3MT x JT3 4MT x JT6 4MT x JT3 15.40 15.40 19.80 19.80 27.50 27.50 $ $ $ $ $ $ (D442) (D442A) (D443) (D443A) (D454) (D454A) WORKSHOP DRILL $196.90 SET 170 Piece 1-10mm (D126) SIZE 1-2 2-3 3-4 4-5 5-6 Outside 2MT 3MT 4MT 5MT 6MT Inside $ 1MT 14.30 $ 2MT 19.80 $ 3MT 26.40 $ 4MT 52.80 $ 5MT 148.50 (D420) (D422) (D424) (D425) (D426) COUNTERSINK SET 8 Piece 13 -25mm 8 Piece 9/16"-1" 97.90 (D117) 104.50 (D118) $ $ MT SHANK SET (D119) 20-piece METRIC Set 75.90 80.30 (T019) $ (D105) COUNTERSINK SET HSS DRILL SETS DRILL DRIFTS – Black Oxidised Precision ground 25pce Metric 1-13mm 68.20 (D127) $ 75.90 $ 29pce Imperial 1/16 - 1/2" (D106) 2-3MT 3-4MT 4-5MT 79.20 (D128) PRICE $13.20 $16.50 $22.00 185.90 $ (T100) HOLE ENLARGING DRILL SET • For drilling holes in thin material • 4-12mm, 6-20mm, 6-30mm 3-piece Set 86.90 (D107) $ INDIVIDUAL THREAD REPAIR KIT - Sydney (02) 9890 9111 TAP WRENCHES • Adjustable tap wrench • Hardened Jaws • Forged steel 1 piece Fully Ground Drill 1 piece DIN352 HSS Tap 10 SS threading Inserts 1 Insert handle M6 x 1.0mm $37.40 M8 x 1.25mm $44.00 M10 x 1.5mm $48.40 M12 x 1.75mm $48.40 (T107) (T109) (T110) (T113) 1/16" - 1/4" $11.00 (T009) 5/32" - 3/8" $19.80 (T010) 3/16" - 1/2" $24.20 (T011) Brisbane (07) 3274 4222 7 8 11 13 19.80 (D505) $ .00 (D501) $ .80 (D502) $ .00 (D503) $ .20 (D504) $ Taps: 3, 4, 5, 6, 8, 10 & 12mm, Taps (3 each size) & Tapping size drill to suit each size $ • 3 Flute type Metric (5,6,8,10,12mm) 30mm 40mm 50mm 56mm 63mm Metric 6-20mm 6-piece Set THREAD REPAIR KIT Length TAP & DRILL SET 159.50 $ 10 Piece 14.5-23mm • 4 piece set cross hole type • Range: 2-5, 5-10, 10-15, 15-20mm SIZE Point Shank Dia. 1 1.25mm 3.5mm 2 2mm 5mm 3 3.15mm 8mm 4 4mm 10mm 5 5mm 12.5mm $ BSPT - Single Taps SIZE 1/8” x 28 1/4” x 19 3/8” x 19 $ ARBORS TAPER SHANK METRIC - Set SIZE 1/8” x 40 3/16” x 24 1/4” x 20 5/16” x 18 3/8” x 16 1/2” x 12 5/8” x 11 3/4” x 10 $ 13mm Keyed JT6 Imperial SIZE M3 x 0.5mm M4 x 0.7mm M5 x 0.8mm M6 x 1.0mm M8 x 1.25mm M10 x 1.5mm M12 x 1.75mm M16 x 2.0mm M20 x 2.5mm KEYLESS 7.70 9.90 $ 16.50 $ $ (D415) (D416) (D417) H.S.S. ADJUSTABLE REAMERS METRIC SIZE 9.5 - 10.3mm 10.3 - 11.1mm 11.1 - 11.9mm 11.9 - 13.5mm 15.0 - 16.6mm 18.2 - 19.8mm 19.8 - 21.4mm 21.4 - 23.8mm 23.8 - 26.9mm IMPERIAL SIZE 3/8"-13/32" 13/32" - 7/16" 7/16" - 15/32" 15/32" - 17/32" 19/32" - 21/32" 23/32 - 25/32" 25/32" - 27/32" 27/32" - 15/16" 15/16" - 1.1/16" 45.10 47.30 50.60 56.10 59.40 70.40 74.80 79.20 92.40 $ $ $ $ $ $ $ $ $ (R710) (R712) (R714) (R716) (R720) (R724) (R726) (R728) (R730) ADJUSTABLE REAMER SET - H.S.S. • High speed steel blades • 8 Piece Set • 15/32" - 1 1/16" range 251.90 $ (R700) Melbourne (03) 9212 4422 Perth (08) 9373 9999 www.machineryhouse.com.au 106  Silicon Chip siliconchip.com.au Specifications & Prices are subject to change without notification. All prices include G.S.T. and valid until 28-07-09 4_SC_270509 45 Pce - TAP & DIE SET