Short Form Kits / Part Sets - Silicon Chip Shop

Micromite LCD BackPack V2 complete kit

A kit of all the parts required to build the revised version of the Micromite LCD BackPack.

PLEASE NOTE: the 10µF capacitors supplied are either non-polarised SMD or through-hole ceramic types. They have no markings and can be installed either way around.

This includes:

PCB (green)
2.8-inch touchscreen with 320x240 pixels
Programmed microcontrollers and IC sockets
3.3V low-dropout regulator
All capacitors (ceramic types supplied)
2 1kΩ & 2 10kΩ resistors
Mosfets for PWM-controlled backlight dimming
Pin headers (male and female)
Tapped spacers, machine screws and Nylon washers
UB3 lid (laser-cut 3mm acrylic)

The PCBs, programmed microcontrollers and regulator are also available separately. For assembly instructions, see the article in the May 2017 issue.

Programmed with: Lid colour:
Cat No SC4237. Price: AUD $70.00 ¹		Add to trolley
In stock: yes (14 available). Estimated dispatch time: up to 3 days
Related to: Project: Micromite BackPack V2 with touch-screen and USB (May 2017) Project: Touchscreen Altimeter and Weather station (December 2017) Project: Super Clock now shows your electricity tariff (July 2018) Project: GPS-synched Frequency Reference Pt.1 (October 2018) Project: GPS-synched, lab-quality frequency reference (Part 2) (November 2018) Project: Indoor Air Quality Monitor based on a Micromite BackPack (February 2020) Circuit Notebook: Combining DDS and IF alignment circuits (March 2020) Project: An altimeter for your... car? (May 2020) Project: Touchscreen Digital Preamp with Tone Control – Part 1 (September 2021) Project: Touchscreen Digital Preamp with Tone Control – Part 2 (October 2021)
Other items relevant for these projects: Touchscreen & Remote Digital Preamp with Tone Control: Touchscreen Digital Preamp PCB [01103191] ($12.50) Touchscreen Digital Preamp ribbon cable/IR adaptor PCB [01103192] ($2.50) PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 2.8in screen version [0110319A.hex] ($15.00) PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 3.5in screen version [0110319B.hex] ($15.00) Pair of AD8403ARZ10 quad digital potentiometer ICs ($40.00) Micromite LCD BackPack V3 complete kit ($75.00) Micromite LCD BackPack V1 complete kit ($65.00) Firmware for the Touchscreen Digital Preamp (Free) Touchscreen Digital Preamp PCB patterns (PDF download) [01103191/2] (Free) GPS-synched Frequency Reference: GPS-synched Frequency Reference PCB [04107181] ($7.50) PIC32MX170F256B-50I/SP programmed for the GPS-Synched Frequency Reference [0410718A.hex] ($15.00) VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable ($25.00) SMD parts for the GPS-Synched Frequency Reference ($80.00) Firmware (HEX) files and BASIC/C source code for the GPS-Synched Frequency Reference [0410718A.hex] (Free) GPS-Synched Frequency Reference PCB pattern (PDF download) [04107181] ($3.00) GPS-synched Frequency Reference drilling and cutting diagrams (PDF download) (Free) An altimeter for your... car?: Touchscreen Car Altimeter PCB [05105201] ($5.00) PIC32MX170F256B-50I/SP programmed for the Car Altimeter ($15.00) GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board ($2.50) DHT22/AM2302 Temperature and Humidity sensor module ($7.50) Firmware (HEX) file and BASIC source code for the Car Altimeter (Free) Touchscreen Car Altimeter PCB pattern (PDF download) [05105201] (Free) Touchscreen Car Altimeter fan drilling template (PDF download) (Free) Combining DDS and IF alignment circuits: AD9833 DDS module with programmable attenuator ($25.00) Firmware (HEX) file and BASIC source code for the Micromite-based Radio IF Alignment [DDSIFAlign.HEX] (Free) Indoor Air Quality Monitor based on a Micromite BackPack: PIC32MX170F256B-50I/SP programmed for the Indoor Air Quality Monitor [AirQuality.hex] ($15.00) Firmware (HEX) files and BASIC source code for the Indoor Air Quality Monitor [AirQuality.hex] (Free) Super Clock now shows your electricity tariff: PIC32MX170F256B-50I/SP programmed for the Tariff Super Clock [SuperTariffClock.hex] ($15.00) DS3231-based Real Time Clock & Calendar module with mounting hardware and rechargeable cell ($7.50) Firmware (HEX) files and BASIC source code for the Micromite-based Tariff Super Clock [v2] (Free) Touchscreen Altimeter and Weather station: PIC32MX170F256B-50I/SP programmed for the Touchscreen Altimeter/Weather Station ($15.00) Elecrow 1A/500mA Li-ion/LiPo charger board with USB power pass-through ($30.00) 5V 0.8W 160mA solar panel ($4.00) Firmware (HEX) and BASIC source code for the Touchscreen Altimeter/Weather Station (Free) Altimeter/Weather Station front panel artwork (PDF download) ($3.00) Micromite BackPack V2 with touch-screen and USB: Micromite LCD BackPack V2 PCB [07104171] ($7.50) PIC16F1455-I/P programmed for the Microbridge [2410417A.HEX] ($10.00) PIC32MX170F256B-50I/SP programmed for the Micromite Mk2 plus capacitor ($15.00) 2.8-inch TFT Touchscreen LCD module with SD card socket ($25.00) MCP1700 3.3V LDO (TO-92) ($2.00) Matte/Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack ($5.00) Clear UB3 Lid for 2.8-inch Micromite LCD BackPack ($5.00) Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack ($4.00) Software for the Microbridge (Free) Firmware (HEX) file and documents for the Micromite Mk.2 and Micromite Plus (Free) Micromite LCD BackPack V2 PCB pattern (PDF download) [07104171] (Free) PIC32MX170F256B-50I/SP programmed for the Micromite Mk.2 ($15.00)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.

Silicon Chip Shop - Short Form Kits / Part Sets (search for shop items within this category)