Components - Silicon Chip Shop - Silicon Chip Online

Elecrow 1A/500mA Li-ion/LiPo charger board with USB power pass-through

A 46 x 32mm module with a micro-USB type B input port and a full-size USB type A output port, plus connections for a solar panel and Li-ion/LiPo cell.

For more details, see the article in the August 2017 issue titled "El Cheapo Modules: Li-ion & LiPo Chargers" (starting on page 44).

PLEASE NOTE: the red/black colour coding on the cables supplied MAY NOT match the polarity of the connectors on this module.

Incorporates an onboard step-up circuit to provide a regulated 5V output (at up to 500mA) from the cell, plus a 1A charger and automatic input-to-output pass-through. Supplied with three 2-wire JST 2.0 cables to connect the cell and output and optionally, a solar panel for charging. Also incorporates battery level indicator LEDs.

Note that the input and output USB socket data lines are not connected.

Cat No SC4308. Price: AUD $15.00 ¹		Add to trolley
In stock: yes (11 available). Estimated dispatch time: up to 3 days
Related to: Project: An Arduino Data Logger with GPS (August 2017) Project: El Cheapo Modules: Li-ion & LiPo Chargers (August 2017) Project: Arduino Data Logger Part 2 (September 2017) Project: Touchscreen Altimeter and Weather station (December 2017) Project: A Water Tank Level Meter with WiFi and More! (February 2018)
Other items relevant for this project: WiFi Water Tank Level Meter shield PCB with stackable headers [21110171] ($7.50) Arduino Data Logger shield PCB with stackable headers [21107171] ($5.00) Arduino Data Logger shield PCB ($5.00) PIC32MX170F256B-50I/SP programmed for the Touchscreen Altimeter/Weather Station ($15.00) Micromite LCD BackPack V2 complete kit ($70.00) Small 2A boost step-up regulator module (MT3608) ($2.00) microSD Card Adaptor Module ($2.50) IPP80P03P4L04 high-current P-channel Mosfet ($4.00) 5dBi 2.4GHz WiFi antenna with U.FL/IPX adaptor cable ($12.50) 2dBi omnidirectional 2.4GHz WiFi antenna with U.FL/IPX adaptor cable ($10.00) 5m water level sensor (4-20mA) with 5-6m lead ($95.00) 5V 0.8W 160mA solar panel ($4.00) GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board ($5.00) Elecrow 1A Li-ion/LiPo charger board with USB pass-through ($35.00) DS18B20 waterproof digital temperature sensor with ~1m lead ($5.00) TP4056 1A Li-ion/LiPo charger with mini USB socket ($2.50) TP4056 1A Li-ion/LiPo charger with micro USB socket ($2.50) WeMos D1 R2 Arduino-compatible ARM processor board with WiFi ($15.00) DS3231-based Real Time Clock & Calendar module with mounting hardware and rechargeable cell ($7.50) DHT22/AM2302 Temperature and Humidity sensor module ($7.50) DS3231-based Real Time Clock & Calendar module with mounting hardware ($5.00) Blue 3mm LED with diffused lens ($0.25) VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable ($25.00) Arduino sketch (.ino) file and libraries for the WiFi Water Tank Level Meter ($3.00) Firmware (HEX) and BASIC source code for the Touchscreen Altimeter/Weather Station ($3.00) Firmware (Arduino sketch) file for the Arduino Data Logger ($3.00) WiFi Water Tank Level Meter shield PCB pattern (PDF download) [21110171] ($3.00) Arduino Data Logger shield PCB pattern (PDF download) [21107171] ($3.00) Altimeter/Weather Station front panel artwork (PDF download) ($3.00)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.

Silicon Chip Shop - Components (search for shop items within this category)