This is only a preview of the August 2024 issue of Practical Electronics. You can view 0 of the 72 pages in the full issue. Articles in this series:
Articles in this series:
Articles in this series:
Articles in this series:
Articles in this series:
Articles in this series:
|
Practical
Electronics
Editorial offices
Practical Electronics
Tel
01273 777619
Electron Publishing Limited Mob 07973 518682
1 Buckingham Road
Fax 01202 843233
Brighton Email pe<at>electronpublishing.com
East Sussex BN1 3RA
Web www.electronpublishing.com
Advertisement offices
Practical Electronics Adverts Tel
01273 777619
1 Buckingham Road
Mob 07973 518682
Brighton Email pe<at>electronpublishing.com
East Sussex BN1 3RA
Editor
Matt Pulzer
General Manager
Louisa Pulzer
Digital subscriptions Stewart Kearn Tel 01202 880299
Online Editor
Alan Winstanley
Web Systems
Kris Thain
Publisher
Matt Pulzer
Print subscriptions
Practical Electronics Subscriptions
PO Box 6337
Bournemouth BH1 9EH
Tel
01202 087631
United Kingdom
Email pesubs<at>selectps.com
Technical enquiries
We regret technical enquiries cannot be answered over the
telephone. We are unable to offer any advice on the use, purchase,
repair or modification of commercial equipment or the incorporation
or modification of designs published in the magazine. We cannot
provide data or answer queries on articles or projects that are
more than five years old.
Questions about articles or projects should be sent to the editor
by email: pe<at>electronpublishing.com
Projects and circuits
All reasonable precautions are taken to ensure that the advice and
data given to readers is reliable. We cannot, however, guarantee
it and we cannot accept legal responsibility for it.
A number of projects and circuits published in Practical Electronics
employ voltages that can be lethal. You should not build, test,
modify or renovate any item of mains-powered equipment unless
you fully understand the safety aspects involved and you use an
RCD (GFCI) adaptor.
Component supplies
We do not supply electronic components or kits for building the
projects featured, these can be supplied by advertisers. We
advise readers to check that all parts are still available before
commencing any project in a back-dated issue.
Advertisements
Although the proprietors and staff of Practical Electronics take
reasonable precautions to protect the interests of readers by
ensuring as far as practicable that advertisements are bona fide,
the magazine and its publishers cannot give any undertakings
in respect of statements or claims made by advertisers, whether
these advertisements are printed as part of the magazine, or in
inserts. The Publishers regret that under no circumstances will
the magazine accept liability for non-receipt of goods ordered, or
for late delivery, or for faults in manufacture.
Transmitters/bugs/telephone equipment
We advise readers that certain items of radio transmitting and
telephone equipment which may be advertised in our pages
cannot be legally used in the UK. Readers should check the law
before buying any transmitting or telephone equipment, as a fine,
confiscation of equipment and/or imprisonment can result from
illegal use or ownership. The laws vary from country to country;
readers should check local laws.
Practical Electronics | August | 2024
Volume 53. No. 8
August 2024
ISSN 2632 573X
Editorial
Exciting News!
Change is in the air. Practical Electronics is the world’s longestrunning hobby electronics magazine. Our first issue came out in
November 1964 when commercial transistors had been available
for less than a decade and ICs were only just beginning to appear
– at eye-watering prices that only NASA could afford. Many fine
magazines have appeared (and sadly disappeared) in the last 60
years, but PE has endured and thrived. I’m sure that one of the
main reasons PE has survived is the quality of its content – thanks
to the very hard work of all who write and work for the magazine.
But there is another reason – we’ve never been afraid to change,
and now it’s time for a new chapter in PE’s long-running story. We
are joining the Silicon Chip publishing stable.
What does this mean for Practical Electronics?
Silicon Chip is an Australian magazine with which we have
shared content since the beginning of 2008. They have provided
sophisticated projects of the highest quality and it’s been a
very successful relationship. So successful in fact, that when
I mentioned to its editor/publisher Nicholas Vinen that I was
thinking of retiring we decided to work out a way to ensure PE
wouldn’t retire with me.
So, the big question is where does PE go from here? The short
answer is most things will stay exactly as they are. All of PE’s
authors will continue to contribute exactly as they do now. Nicholas
is absolutely clear that PE must not become a ‘Silicon Chip light’,
that would be pointless. If anything, the magazine will get better –
Nicholas intends to up the pagination which means more pages and
more content, all of which will benefit you the reader.
Thank you
I first started working on PE nearly 30 years ago with a small job
producing its circuit diagrams. In 2008 Mike Kenward, the editor/
publisher asked me if I’d consider becoming PE’s editor. I jumped
at the opportunity, and it’s been an exciting and rewarding role.
Then, at the start of 2019 I became publisher, just in time to catch
the full brunt of the pandemic, but we survived!
Throughout my time with PE I have had fantastic support from
our many talented contributors – PE is nothing without its creative
scribes – thank you one and all; in no particular order: Alan
Winstanley, Jake Rothman, Ian Bell, Clive ‘Max’ Maxfield, Mike
Tooley, Julian Edgar, Mike Hibbett, Phil Boyce, Mark Nelson,
Barry Fox, Stewart Kearn, Kris Thain, the late John Becker, Mike
Kenward… and to anyone I’ve left off this list, apologies! Last, but
by no means least, thank you to all our many loyal readers and
subscribers. You’ve kept us going and I’m sure your continued
support will enable Nicholas to carry on bringing you the very best
in electronics publishing over the coming years.
Matt Pulzer
Publisher
7
|